'our quality is your piece of mind'

  • ASP Scatter Shield Flywheel shield
K Series Scatter Shield
$265
Quick Overview
Easy 2 peice instal scatter shield. In the case of an accident, its purpose is to stops the flywheel from shattering through the vehicles firewall. Designed to fit K20 and K24 transmissions. NHRA required for 11.49 second quarter mile or quicker. Meets all NHRA standards. Material in .25 inch thick mild steel. Made in USA.

Qty:

Product Description
Options:
Includes: Black powder coat for longevity, material in mild steel .25" thick by 3" wide. Includes all stainless steel hardware: socket screws, washers, and lock washers.
Restrictions: Scatter shields does not clear the RSX front mount or heater tube used for AC.

www.nhra.com
SECTION 20 | GENERAL REGULATIONS | 2:10 FLYWHEEL SHIELD: OTHER CLASSES
All front-wheel-drive or transverse-mounted applications using a clutch and running 11.49 or quicker, for which an SFI Spec 6.1, 6.2, 6.3, or 9.1 flywheel shield is not commercially available, must be equipped with a flywheel shield made of 1/4-inch minimum thickness steel plate. Shield must surround the bellhousing completely except for area of bellhousing adjacent to differential and axle shaft. Shield may be multi-piece, with pieces bolted together using minimum 3/8-inch-diameter Grade 5 or M10 class 8.8 bolts; may be attached to engine and/or bellhousing.